{"title":"Kulp Controllers","description":"\u003cp\u003eShop Kulp controllers and related products.\u003c\/p\u003e","products":[{"product_id":"kulp-k16-max-pb2iready-2-ship","title":"Kulp K16 Max PB2i(Ready 2 Ship)","description":"\u003cp\u003e\u003cstrong\u003eThis is a Ready to Run controller build\u003c\/strong\u003e — fully assembled and configured, so you can plug in and start running your pixel show right out of the box. No soldering or setup required. This is the industrial build and does not include an SD card.\u003c\/p\u003e\n\u003cp\u003eThe K16-Max is a cape for the PocketBeagle 2 that is designed to drive ws281x LED pixels. It has 16 local ports that can each drive 800 pixels (with power injection) at 40FPS. It also has 8 RJ45 differential ports that can output an additional 32 strings via differential receivers. Finally, it has 2 RS485 outputs for DMX, PixelNet, Renard, LOR.\u003c\/p\u003e\n\u003cp\u003eThe K16-Max has a Real Time Clock (RTC) to maintain time, a temperature sensor, input voltage sensors, an OLED display with navigation push buttons, three powered USB ports, onboard sound, socket for FM transmitter, and a Gigabit Ethernet port (wired via USB2 so roughly 300Mb\/s speed).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe cape provides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e16 pixel connectors in banks for four.\n\u003cul\u003e\n\u003cli\u003eEach bank of four can use any voltage from 5V – 24V\u003c\/li\u003e\n\u003cli\u003eEach string is protected by an eFuse that provides current monitoring, eFuse protection, and instant alerts\u003c\/li\u003e\n\u003cli\u003eEach string can provide up to 6A of power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e8 RJ45 connections for 32 more strings via differential receivers\u003c\/li\u003e\n\u003cli\u003e2 RJ45 connections for DMX\/LOR\u003c\/li\u003e\n\u003cli\u003eOn-board pcm5102 DAC and headphone jack for sound\u003c\/li\u003e\n\u003cli\u003eHeader to attach FM transmitter\u003c\/li\u003e\n\u003cli\u003e3 USB-A connectors for WiFi adapters or other USB devices\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet Connector\u003c\/li\u003e\n\u003cli\u003eExpansion header pins providing 8 gpio outputs and access to I2C bus, 3.3v power, and ground\u003c\/li\u003e\n\u003cli\u003eTemperature sensor.\u003c\/li\u003e\n\u003cli\u003eReal Time Clock\u003c\/li\u003e\n\u003cli\u003e5v 4-Pin PWM Cooling Fan Connector\u003c\/li\u003e\n\u003cli\u003e8 GPIO pins exposed to the user to allow adding additional buttons, proximity sensors, etc… to invoke various effects and functionality.\u003c\/li\u003e\n\u003cli\u003eAdd On Vent option available\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePhotos may not be actual K16 Max\u003c\/p\u003e","brand":"Gilbert Engineering USA","offers":[{"title":"Ray Wu \/ Yes","offer_id":54013139812652,"sku":"sku-52785481318712","price":760.5,"currency_code":"USD","in_stock":true},{"title":"Ray Wu \/ No","offer_id":54013139845420,"sku":"sku-52825682739512","price":750.0,"currency_code":"USD","in_stock":true},{"title":"X-Connect \/ Yes","offer_id":54013139878188,"sku":"sku-52785481351480","price":760.5,"currency_code":"USD","in_stock":true},{"title":"X-Connect \/ No","offer_id":54013139910956,"sku":"sku-52825682772280","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2782\/0131\/files\/02e45e12-b9a9-48b3-b521-7d3dd8391478.jpg?v=1788456641"},{"product_id":"kulp-k16-pro-pb2iready-2-ship","title":"Kulp K16 Pro PB2i(Ready 2 Ship)","description":"\u003cp\u003eThe Kulp K16 Pro PB2i is a fully assembled controller cape for the \u003cb\u003ePocketBeagle 2\u003c\/b\u003e, enabling direct operation of \u003cb\u003eWS281x LED pixels\u003c\/b\u003e without requiring soldering or setup.\u003c\/p\u003e\n\u003cp\u003eThis ready-to-run package supports \u003cb\u003e16 local output ports\u003c\/b\u003e, each driving up to 800 pixels at 40 FPS with power injection. Ports are organized into banks accommodating 5V to 24V inputs with a \u003cb\u003e5 amp capacity\u003c\/b\u003e per string.\u003c\/p\u003e\n\u003cp\u003eExpansion capabilities include four RJ45 differential ports providing \u003cb\u003e16 additional strings\u003c\/b\u003e, plus an RS485 output for DMX, PixelNet, Renard, or LOR protocols. System status displays via an onboard \u003cb\u003eOLED screen\u003c\/b\u003e with navigation buttons, supported by a temperature sensor, voltage sensors, and a Real Time Clock (RTC).\u003c\/p\u003e\n\u003cp\u003eNetwork connectivity utilizes a Gigabit Ethernet port (operating near 300 Mb\/s via USB2) and a powered USB-A port. Because of the board's USB pinout, a specialized USB extension cable is included to ensure compatibility with \u003cb\u003eWiFi adapters\u003c\/b\u003e and reduce signal interference from internal components.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdd On Vent option available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilbert Engineering USA","offers":[{"title":"Ray Wu \/ Yes","offer_id":54013139943724,"sku":"sku-52785447371064","price":722.5,"currency_code":"USD","in_stock":true},{"title":"Ray Wu \/ No","offer_id":54013139976492,"sku":"sku-52825730613560","price":710.0,"currency_code":"USD","in_stock":true},{"title":"X-Connect \/ Yes","offer_id":54013140009260,"sku":"sku-52785447403832","price":722.5,"currency_code":"USD","in_stock":true},{"title":"X-Connect \/ No","offer_id":54013140042028,"sku":"sku-52825730646328","price":710.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2782\/0131\/files\/02e45e12-b9a9-48b3-b521-7d3dd8391478_dfbe3405-5462-4b5a-a8a4-ea5fcce3420d.jpg?v=1788456641"},{"product_id":"kulp-k32-max-pb2iready-to-ship","title":"Kulp K32 Max PB2i(Ready to Ship)","description":"\u003cp\u003eThe Kulp K32 Max PB2i is a fully assembled and configured controller cape designed for the PocketBeagle 2, enabling immediate pixel show operation without soldering or technical setup. This industrial build drives WS281x LEDs through 32 local ports, with each capable of managing 800 pixels at 40FPS with power injection. Additional connectivity offers 8 RJ45 differential ports for 32 extra strings, alongside two RS485 outputs for DMX, PixelNet, Renard, and LOR.\u003c\/p\u003e\n\u003cp\u003ePower settings accommodate 5V–24V across banks of four connectors, supplying up to 5A per string. The system features a Gigabit Ethernet port operating at roughly 300Mb\/s over USB2, three powered USB-A ports for Wi-Fi adapters, and audio functionality via an onboard pcm5102 DAC and headphone jack. Operational status is monitored through a Real Time Clock, temperature sensor, and voltage sensors accessible via an OLED display with navigation buttons.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHardware Interfaces:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFM Transmitter Socket included\u003c\/li\u003e\n\u003cli\u003e8 GPIO pins with I2C bus access\u003c\/li\u003e\n\u003cli\u003e5V 4-Pin PWM Cooling Fan Connector\u003c\/li\u003e\n\u003cli\u003eAdd On Vent option available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePhoto may not be actual K32 Max board\u003c\/p\u003e","brand":"Gilbert Engineering USA","offers":[{"title":"X-Connect \/ Yes","offer_id":54013140074796,"sku":"sku-52785577754936","price":1262.5,"currency_code":"USD","in_stock":true},{"title":"X-Connect \/ No","offer_id":54013140107564,"sku":"sku-52825673761080","price":1250.0,"currency_code":"USD","in_stock":true},{"title":"Ray Wu \/ Yes","offer_id":54013140140332,"sku":"sku-52785577787704","price":1262.5,"currency_code":"USD","in_stock":true},{"title":"Ray Wu \/ No","offer_id":54013140173100,"sku":"sku-52825673793848","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2782\/0131\/files\/ChatGPT_Image_Aug_10_2026_04_12_56_PM.jpg?v=1788456641"},{"product_id":"kulp-k16-pb2ready-2-ship","title":"Kulp K16 PB2(Ready 2 Ship)","description":"\u003cp\u003e\u003cstrong\u003eThis is a Ready to Run controller build\u003c\/strong\u003e — fully assembled and configured, so you can plug in and start running your pixel show right out of the box. No soldering or setup required.\u003c\/p\u003e\n\u003cp\u003eThe K16 is a cape for the PocketBeagle 2 that is designed to drive ws281x LED pixels. It has 16 local ports that can each drive 800 pixels (with power injection) at 40FPS. It also has 4 RJ45 differential ports that can output an additional 16 strings via differential receivers. Finally, it has a RS485 output for DMX, PixelNet, Renard, LOR.\u003c\/p\u003e\n\u003cp\u003eThe K16 has a Real Time Clock (RTC) to maintain time, a temperature sensor, input voltage sensors, an OLED display with navigation push buttons, one powered USB port, and a Gigabit Ethernet port (wired via USB2 so roughly 300Mb\/s speed).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: The USB port on the K16 is wired incorrectly. A special USB extension cable will be included with the K16 which corrects the wiring. This also allows WIFI adapters to be placed further from the K16 which can increase the signal strength due to the multiple layers of copper and signals on the K16 interfering with the WIFI signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuild includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e64GB SD card (pre-loaded and ready to go)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe cape provides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e16 pixel connectors in banks for four.\n\u003cul\u003e\n\u003cli\u003eEach bank of four can use any voltage from 5V – 24V\u003c\/li\u003e\n\u003cli\u003eEach string can provide up to 5A of power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 RJ45 connections for 16 more strings via differential receivers\u003c\/li\u003e\n\u003cli\u003e1 RJ45 connection for DMX\/LOR\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 USB-A connector for WiFi adapters or other USB devices. Special USB extension cable included.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet Connector\u003c\/li\u003e\n\u003cli\u003eTemperature sensor.\u003c\/li\u003e\n\u003cli\u003eReal Time Clock\u003c\/li\u003e\n\u003cli\u003eAdd On Vent option available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilbert Engineering USA","offers":[{"title":"Ray Wu \/ Yes","offer_id":54013140205868,"sku":"sku-52011859345720","price":692.5,"currency_code":"USD","in_stock":true},{"title":"Ray Wu \/ No","offer_id":54013140238636,"sku":"sku-52825748046136","price":680.0,"currency_code":"USD","in_stock":true},{"title":"X-Connect \/ Yes","offer_id":54013140271404,"sku":"sku-52011859378488","price":692.5,"currency_code":"USD","in_stock":true},{"title":"X-Connect \/ No","offer_id":54013140304172,"sku":"sku-52825748078904","price":680.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2782\/0131\/files\/02e45e12-b9a9-48b3-b521-7d3dd8391478_9ae8eddb-20c3-4904-bac2-e6e91bcdca55.jpg?v=1788456641"},{"product_id":"kulp-k32-pb2-64gready-to-ship","title":"Kulp K32 PB2 64G(Ready to Ship)","description":"\u003cp\u003e\u003cstrong\u003eThis is a Ready to Run controller build\u003c\/strong\u003e — fully assembled and configured, so you can plug in and start running your pixel show right out of the box. No soldering or setup required. This is the industrial build and does not include an SD card.\u003c\/p\u003e\n\u003cp\u003eThe K32 is a cape and comes with a PocketBeagle 2 that is designed to drive ws281x LED pixels. It has 32 local ports that can each drive 800 pixels (with power injection) at 40FPS. It also has 4 RJ45 differential ports that can output an additional 16 strings via differential receivers. Finally, it has a RS485 output for DMX, PixelNet, Renard, LOR.\u003c\/p\u003e\n\u003cp\u003eThe K32 has a Real Time Clock (RTC) to maintain time, a temperature sensor, input voltage sensors, an OLED display with navigation push buttons, one powered USB port, and a Gigabit Ethernet port (wired via USB2 so roughly 300Mb\/s speed).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: The USB port on the K32 is wired incorrectly. A special USB extension cable will be included with the K32 which corrects the wiring. This also allows WIFI adapters to be placed further from the K32 which can increase the signal strength due to the multiple layers of copper and signals on the K32 interfering with the WIFI signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe cape provides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32 pixel connectors in banks for four.\n\u003cul\u003e\n\u003cli\u003eEach bank of four can use any voltage from 5V – 24V\u003c\/li\u003e\n\u003cli\u003eEach string can provide up to 5A of power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 RJ45 connections for 16 more strings via differential receivers\u003c\/li\u003e\n\u003cli\u003e1 RJ45 connection for DMX\/LOR\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1 USB-A connector for WiFi adapters or other USB devices. Special USB extension cable included.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet Connector\u003c\/li\u003e\n\u003cli\u003eTemperature sensor.\u003c\/li\u003e\n\u003cli\u003eReal Time Clock\u003c\/li\u003e\n\u003cli\u003eAdd On Vent option available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePhotos may not be actual K32\u003c\/p\u003e","brand":"Gilbert Engineering USA","offers":[{"title":"X-Connect \/ Yes","offer_id":54013140468012,"sku":"sku-52786742198584","price":992.5,"currency_code":"USD","in_stock":true},{"title":"X-Connect \/ No","offer_id":54013140500780,"sku":"sku-52825686671672","price":980.0,"currency_code":"USD","in_stock":true},{"title":"Ray Wu \/ Yes","offer_id":54013140533548,"sku":"sku-52786742231352","price":992.5,"currency_code":"USD","in_stock":true},{"title":"Ray Wu \/ No","offer_id":54013140566316,"sku":"sku-52825686704440","price":980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2782\/0131\/files\/ChatGPT_Image_Aug_10_2026_04_12_56_PM_6f951ed6-2954-4efc-972f-e01fbf489aee.jpg?v=1788456647"},{"product_id":"kulp-k16-pro-pb2i","title":"Kulp K16 PRO-PB2i","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e The PB2 Industrial has FPP installed on the internal eMMC. \u003cstrong\u003eNo SD card is required.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe K16-Pro is a cape for the PocketBeagle 2 that is designed to drive ws281x LED pixels. It has 16 local ports that can each drive 800 pixels (with power injection) at 40FPS. It also has 8 RJ45 differential ports that can output an additional 32 strings via differential receivers. Finally, it has two RS485 outputs for DMX, PixelNet, Renard, LOR.\u003c\/p\u003e\n\u003cp\u003eThe K16-Pro has a Real Time Clock (RTC) to maintain time, a temperature sensor, input voltage sensors, an OLED display with navigation push buttons, three powered USB ports, onboard sound, socket for FM transmitter, and a Gigabit Ethernet port (wired via USB2 so roughly 300Mb\/s speed).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe cape provides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e16 pixel connectors in banks for four.\n\u003cul\u003e\n\u003cli\u003eEach bank of four can use any voltage from 5V – 24V\u003c\/li\u003e\n\u003cli\u003eEach string can provide up to 5A of power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e8 RJ45 connections for 32 more strings via differential receivers\u003c\/li\u003e\n\u003cli\u003e2 RJ45 connections for DMX\/LOR\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 USB-A connectors for WIFIi adapters or other USB devices\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eOn-board pcm5102 DAC and headphone jack for sound\u003c\/li\u003e\n\u003cli\u003eHeader to attach FM transmitter\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet Connector\u003c\/li\u003e\n\u003cli\u003eExpansion header pins providing 8 gpio outputs and access to I2C bus, 3.3v power, and ground\u003c\/li\u003e\n\u003cli\u003eTemperature sensor.\u003c\/li\u003e\n\u003cli\u003eReal Time Clock\u003c\/li\u003e\n\u003cli\u003e5v 4-Pin PWM Cooling Fan Connector\u003c\/li\u003e\n\u003cli\u003e8 GPIO pins exposed to the user to allow adding additional buttons, proximity sensors, etc… to invoke various effects and functionality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eYou will need:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePocketBeagle 2 – the K16-Pro will NOT work with a PocketBeagle 1\u003c\/li\u003e\n\u003cli\u003eThe latest FPP images can always be found at\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/FalconChristmas\/fpp\/releases\/\"\u003ehttps:\/\/github.com\/FalconChristmas\/fpp\/releases\/\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003cli\u003ews281x compatible pixels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kulplights.com\/wp-content\/uploads\/2025\/08\/K16.pdf\"\u003ehttps:\/\/kulplights.com\/wp-content\/uploads\/2025\/08\/K16.pdf\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.thingiverse.com\/thing:7181496\"\u003ehttps:\/\/www.thingiverse.com\/thing:7181496\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilbert Engineering USA","offers":[{"title":"Default Title","offer_id":54013140435244,"sku":"sku-52630141370680","price":209.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2782\/0131\/files\/IMG_1539.jpg?v=1788456647"},{"product_id":"kulp-k8-max-pb2i","title":"Kulp K8 MAX-PB2i","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e The PB2 Industrial will have FPP installed on the eMMC. \u003cstrong\u003eNo SD card is required.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe K8-Max is a cape for the PocketBeagle 2 that is designed to drive ws281x LED pixels. It has 8 local ports that can each drive 800 pixels (with power injection) at 40FPS. It also has 4 RJ45 differential ports that can output an additional 16 strings via differential receivers. Finally, it has one RS485 output for DMX, PixelNet, Renard, LOR.\u003c\/p\u003e\n\u003cp\u003eThe K8-Max has a Real Time Clock (RTC) to maintain time, a temperature sensor, input voltage sensors, an OLED display with navigation push buttons, three powered USB ports, onboard sound, socket for FM transmitter, and a Gigabit Ethernet port (wired via USB2 so roughly 300Mb\/s speed).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe cape provides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8 pixel connectors in banks for four.\n\u003cul\u003e\n\u003cli\u003eEach bank of four can use any voltage from 5V – 24V\u003c\/li\u003e\n\u003cli\u003eEach string is protected by an eFuse that provides current monitoring, eFuse protection, and instant alerts\u003c\/li\u003e\n\u003cli\u003eEach string can provide up to 6A of power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 RJ45 connections for 16 more strings via differential receivers\u003c\/li\u003e\n\u003cli\u003e1 RJ45 connection for DMX\/LOR\u003c\/li\u003e\n\u003cli\u003eOn-board pcm5102 DAC and headphone jack for sound\u003c\/li\u003e\n\u003cli\u003eHeader to attach FM transmitter\u003c\/li\u003e\n\u003cli\u003e3 USB-A connector for WIFIi adapters or other USB devices\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet Connector\u003c\/li\u003e\n\u003cli\u003eExpansion header pins providing 8 gpio outputs and access to I2C bus, 3.3v power, and ground\u003c\/li\u003e\n\u003cli\u003eTemperature sensor.\u003c\/li\u003e\n\u003cli\u003eReal Time Clock\u003c\/li\u003e\n\u003cli\u003e5v 4-Pin PWM Cooling Fan Connector\u003c\/li\u003e\n\u003cli\u003e8 GPIO pins exposed to the user to allow adding additional buttons, proximity sensors, etc… to invoke various effects and functionality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eYou will need:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePocketBeagle 2 – the K8-Max will NOT work with a PocketBeagle 1\u003c\/li\u003e\n\u003cli\u003eThe latest FPP images can always be found at\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/FalconChristmas\/fpp\/releases\/\"\u003ehttps:\/\/github.com\/FalconChristmas\/fpp\/releases\/\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003cli\u003ews281x compatible pixels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kulplights.com\/wp-content\/uploads\/2025\/12\/K8-Max.pdf\"\u003ehttps:\/\/kulplights.com\/wp-content\/uploads\/2025\/12\/K8-Max.pdf\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilbert Engineering USA","offers":[{"title":"Default Title","offer_id":54013140631852,"sku":"sku-52630122922296","price":191.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2782\/0131\/files\/IMG_1662-709x800.jpg?v=1788456647"},{"product_id":"kulp-k16-pro","title":"Kulp K16 Pro","description":"\u003cp\u003e\u003cspan\u003e16 Output String Cape with Pre-Mounted PocketBeagle2 \u0026amp; 64G SD card with FPP Installed!\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eThe K16-Pro is a cape for the PocketBeagle 2 that is designed to drive ws281x LED pixels. It has 16 local ports that can each drive 800 pixels (with power injection) at 40FPS. It also has 8 RJ45 differential ports that can output an additional 32 strings via differential receivers. Finally, it has two RS485 outputs for DMX, PixelNet, Renard, LOR.\u003c\/p\u003e\n\u003cp\u003eThe K16-Pro has a Real Time Clock (RTC) to maintain time, a temperature sensor, input voltage sensors, an OLED display with navigation push buttons, three powered USB ports, onboard sound, socket for FM transmitter, and a Gigabit Ethernet port (wired via USB2 so roughly 300Mb\/s speed).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe cape provides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e16 pixel connectors in banks for four.\n\u003cul\u003e\n\u003cli\u003eEach bank of four can use any voltage from 5V – 24V\u003c\/li\u003e\n\u003cli\u003eEach string can provide up to 5A of power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e8 RJ45 connections for 32 more strings via differential receivers\u003c\/li\u003e\n\u003cli\u003e2 RJ45 connections for DMX\/LOR\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 USB-A connectors for WIFIi adapters or other USB devices\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eOn-board pcm5102 DAC and headphone jack for sound\u003c\/li\u003e\n\u003cli\u003eHeader to attach FM transmitter\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet Connector\u003c\/li\u003e\n\u003cli\u003eExpansion header pins providing 8 gpio outputs and access to I2C bus, 3.3v power, and ground\u003c\/li\u003e\n\u003cli\u003eTemperature sensor.\u003c\/li\u003e\n\u003cli\u003eReal Time Clock\u003c\/li\u003e\n\u003cli\u003e5v 4-Pin PWM Cooling Fan Connector\u003c\/li\u003e\n\u003cli\u003e8 GPIO pins exposed to the user to allow adding additional buttons, proximity sensors, etc… to invoke various effects and functionality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eYou will need:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e(Included \u0026amp; Pre-Mounted) PocketBeagle2\u003c\/span\u003e – the K16-Pro will NOT work with a PocketBeagle 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e(64G SD Included with FPP Installed) \u003c\/span\u003eA good quality SD card with the latest FPP image installed on it. The K16 requires at least FPP 9.0 to be fully functional. The latest FPP images can always be found at\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/FalconChristmas\/fpp\/releases\/\"\u003ehttps:\/\/github.com\/FalconChristmas\/fpp\/releases\/\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003cli\u003ews281x compatible pixels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kulplights.com\/wp-content\/uploads\/2025\/08\/K16.pdf\"\u003ehttps:\/\/kulplights.com\/wp-content\/uploads\/2025\/08\/K16.pdf\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilbert Engineering USA","offers":[{"title":"Default Title","offer_id":54013140664620,"sku":"sku-50987010195768","price":185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2782\/0131\/files\/ChatGPT_Image_Sep_3_2026_11_21_14_AM.png?v=1788459688"},{"product_id":"kulp-k32-max-pb2i","title":"Kulp K32 MAX-PB2i","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eThe PB2 Industrial has FPP installed on the internal eMMC. \u003cstrong\u003eNo SD card is required.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe K32-Max is a cape for the PocketBeagle 2 that is designed to drive ws281x LED pixels. It has 32 local ports that can each drive 800 pixels (with power injection) at 40FPS. It also has 8 RJ45 differential ports that can output an additional 32 strings via differential receivers. Finally, it has 2 RS485 outputs for DMX, PixelNet, Renard, LOR.\u003c\/p\u003e\n\u003cp\u003eThe K32-Max has a Real Time Clock (RTC) to maintain time, a temperature sensor, input voltage sensors, an OLED display with navigation push buttons, three powered USB ports, onboard sound, socket for FM transmitter, and a Gigabit Ethernet port (wired via USB2 so roughly 300Mb\/s speed).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe cape provides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32 pixel connectors in banks for four.\n\u003cul\u003e\n\u003cli\u003eEach bank of four can use any voltage from 5V – 24V\u003c\/li\u003e\n\u003cli\u003eEach string is protected by an eFuse that provides current monitoring, eFuse protection, and instant alerts\u003c\/li\u003e\n\u003cli\u003eEach string can provide up to 6A of power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e8 RJ45 connections for 32 more strings via differential receivers\u003c\/li\u003e\n\u003cli\u003e2 RJ45 connections for DMX\/LOR\u003c\/li\u003e\n\u003cli\u003eOn-board pcm5102 DAC and headphone jack for sound\u003c\/li\u003e\n\u003cli\u003eHeader to attach FM transmitter\u003c\/li\u003e\n\u003cli\u003e3 USB-A connector for WIFIi adapters or other USB devices\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet Connector\u003c\/li\u003e\n\u003cli\u003eExpansion header pins providing 8 gpio outputs and access to I2C bus, 3.3v power, and ground\u003c\/li\u003e\n\u003cli\u003eTemperature sensor.\u003c\/li\u003e\n\u003cli\u003eReal Time Clock\u003c\/li\u003e\n\u003cli\u003e5v 4-Pin PWM Cooling Fan Connector\u003c\/li\u003e\n\u003cli\u003e8 GPIO pins exposed to the user to allow adding additional buttons, proximity sensors, etc… to invoke various effects and functionality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eYou will need:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePocketBeagle 2 – the K32-Max will NOT work with a PocketBeagle 1\u003c\/li\u003e\n\u003cli\u003eA good quality SD card with the latest FPP image installed on it. The K32-Max requires at least FPP 9.0 to be fully functional. The latest FPP images can always be found at\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/FalconChristmas\/fpp\/releases\/\"\u003ehttps:\/\/github.com\/FalconChristmas\/fpp\/releases\/\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003cli\u003ews281x compatible pixels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kulplights.com\/wp-content\/uploads\/2025\/05\/K32-Max.pdf\"\u003ehttps:\/\/kulplights.com\/wp-content\/uploads\/2025\/05\/K32-Max.pdf\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kulplights.com\/wp-content\/uploads\/2025\/05\/K32-Max.svg\"\u003ehttps:\/\/kulplights.com\/wp-content\/uploads\/2025\/05\/K32-Max.svg\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.thingiverse.com\/thing:7065715\"\u003ehttps:\/\/www.thingiverse.com\/thing:7065715\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilbert Engineering USA","offers":[{"title":"Default Title","offer_id":54013140697388,"sku":"sku-52630163718456","price":321.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2782\/0131\/files\/IMG_1507-510x602.jpg?v=1788456647"},{"product_id":"kulp-k16","title":"Kulp K16","description":"\u003cp\u003eThe K16 is a cape for the PocketBeagle 2 that is designed to drive ws281x LED pixels. It has 16 local ports that can each drive 800 pixels (with power injection) at 40FPS. It also has 4 RJ45 differential ports that can output an additional 16 strings via differential receivers. Finally, it has a RS485 output for DMX, PixelNet, Renard, LOR.\u003c\/p\u003e\n\u003cp\u003eThe K16 has a Real Time Clock (RTC) to maintain time, a temperature sensor, input voltage sensors, an OLED display with navigation push buttons, one powered USB port, and a Gigabit Ethernet port (wired via USB2 so roughly 300Mb\/s speed).\u003c\/p\u003e\n\u003cp\u003eNOTE: The USB port on the K16 is wired incorrectly. \u0026amp;nbsp;A special USB extension cable will be included with the K16 which corrects the wiring. This also allows WIFI adapters to be placed further from the K16 which can increase the signal strength due to the multiple layers of copper and signals on the K16 interfering with the WIFI signal.\u003c\/p\u003e\n\u003cp\u003eThe cape provides:\u003c\/p\u003e\n\u003cp\u003e16 pixel connectors in banks for four.\u003cbr\u003eEach bank of four can use any voltage from 5V – 24V\u003cbr\u003eEach string can provide up to 5A of power\u003cbr\u003e4 RJ45 connections for 16 more strings via differential receivers\u003cbr\u003e1 RJ45 connection for DMX\/LOR\u003cbr\u003e1 USB-A connector for WIFI adapters or other USB devices. \u0026amp;nbsp;Special USB extension cable included.\u003cbr\u003eGigabit Ethernet Connector\u003cbr\u003eTemperature sensor.\u003cbr\u003eReal Time Clock\u003c\/p\u003e\n\u003cp\u003eYou will need:\u003c\/p\u003e\n\u003cp\u003e(Included \u0026amp;amp; Pre-Mounted) PocketBeagle2 – the K16 will NOT work with a PocketBeagle 1\u003cbr\u003e(64G SD Included with FPP Installed) A good quality SD card with the latest FPP image installed on it. The K16 requires at least FPP 9.0 to be fully functional. The latest FPP images can always be found at\u0026amp;nbsp;https:\/\/github.com\/FalconChristmas\/fpp\/releases\/\u003cbr\u003ePower supply\u003cbr\u003ews281x compatible pixels\u003c\/p\u003e\n\u003cp\u003eMounting Information:\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/kulplights.com\/wp-content\/uploads\/2025\/08\/K16.pdf\u003c\/p\u003e","brand":"Gilbert Engineering USA","offers":[{"title":"Default Title","offer_id":54013140730156,"sku":"sku-50987005346104","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2782\/0131\/files\/imgi_17_IMG_1538-scaled_9ab894f3-7c42-465e-863d-f5e596cc39bd.jpg?v=1788456647"},{"product_id":"kulp-k32-pro-pb2iready-to-ship","title":"Kulp K32 Pro PB2i(Ready to Ship)","description":"\u003cp\u003e\u003cstrong\u003eThis is a Ready to Run controller build\u003c\/strong\u003e — fully assembled and configured, so you can plug in and start running your pixel show right out of the box. No soldering or setup required. This is the industrial build and does not include an SD card.\u003c\/p\u003e\n\u003cp\u003eThe K32-Pro is a cape for the PocketBeagle 2 that is designed to drive ws281x LED pixels. It has 32 local ports that can each drive 800 pixels (with power injection) at 40FPS. It also has 8 RJ45 differential ports that can output an additional 32 strings via differential receivers. Finally, it has two RS485 outputs for DMX, PixelNet, Renard, LOR.\u003c\/p\u003e\n\u003cp\u003eThe K32-Pro has a Real Time Clock (RTC) to maintain time, a temperature sensor, input voltage sensors, an OLED display with navigation push buttons, three powered USB ports, onboard sound, socket for FM transmitter, and a Gigabit Ethernet port (wired via USB2 so roughly 300Mb\/s speed).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe cape provides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32 pixel connectors in banks for four.\n\u003cul\u003e\n\u003cli\u003eEach bank of four can use any voltage from 5V – 24V\u003c\/li\u003e\n\u003cli\u003eEach string can provide up to 5A of power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e8 RJ45 connections for 32 more strings via differential receivers\u003c\/li\u003e\n\u003cli\u003e2 RJ45 connections for DMX\/LOR\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 USB-A connectors for WiFi adapters or other USB devices\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eOn-board pcm5102 DAC and headphone jack for sound\u003c\/li\u003e\n\u003cli\u003eHeader to attach FM transmitter\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet Connector\u003c\/li\u003e\n\u003cli\u003eExpansion header pins providing 8 gpio outputs and access to I2C bus, 3.3v power, and ground\u003c\/li\u003e\n\u003cli\u003eTemperature sensor.\u003c\/li\u003e\n\u003cli\u003eReal Time Clock\u003c\/li\u003e\n\u003cli\u003e5v 4-Pin PWM Cooling Fan Connector\u003c\/li\u003e\n\u003cli\u003e8 GPIO pins exposed to the user to allow adding additional buttons, proximity sensors, etc… to invoke various effects and functionality.\u003c\/li\u003e\n\u003cli\u003eAdd On Vent option available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePhotos may not be actual K32 Pro\u003c\/p\u003e","brand":"Gilbert Engineering USA","offers":[{"title":"X-Connect \/ Yes","offer_id":54013140795692,"sku":"sku-52785536237880","price":1162.5,"currency_code":"USD","in_stock":true},{"title":"X-Connect \/ No","offer_id":54013140828460,"sku":"sku-52825680052536","price":1150.0,"currency_code":"USD","in_stock":true},{"title":"Ray Wu \/ Yes","offer_id":54013140861228,"sku":"sku-52785536270648","price":1162.5,"currency_code":"USD","in_stock":true},{"title":"Ray Wu \/ No","offer_id":54013140893996,"sku":"sku-52825680085304","price":1150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2782\/0131\/files\/ChatGPT_Image_Aug_10_2026_04_12_56_PM_ba19b6c8-4d75-420b-95d5-b3708b291597.jpg?v=1788456648"},{"product_id":"kulp-k16-max-pb2i","title":"Kulp K16 MAX-PB2i","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e The PB2 Industrial has FPP installed on the internal eMMC. \u003cstrong\u003eNo SD card is required.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe K16-Max is a cape for the PocketBeagle 2 that is designed to drive ws281x LED pixels. It has 16 local ports that can each drive 800 pixels (with power injection) at 40FPS. It also has 8 RJ45 differential ports that can output an additional 32 strings via differential receivers. Finally, it has 2 RS485 outputs for DMX, PixelNet, Renard, LOR.\u003c\/p\u003e\n\u003cp\u003eThe K16-Max has a Real Time Clock (RTC) to maintain time, a temperature sensor, input voltage sensors, an OLED display with navigation push buttons, three powered USB ports, onboard sound, socket for FM transmitter, and a Gigabit Ethernet port (wired via USB2 so roughly 300Mb\/s speed).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe cape provides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e16 pixel connectors in banks for four.\n\u003cul\u003e\n\u003cli\u003eEach bank of four can use any voltage from 5V – 24V\u003c\/li\u003e\n\u003cli\u003eEach string is protected by an eFuse that provides current monitoring, eFuse protection, and instant alerts\u003c\/li\u003e\n\u003cli\u003eEach string can provide up to 6A of power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e8 RJ45 connections for 32 more strings via differential receivers\u003c\/li\u003e\n\u003cli\u003e2 RJ45 connections for DMX\/LOR\u003c\/li\u003e\n\u003cli\u003eOn-board pcm5102 DAC and headphone jack for sound\u003c\/li\u003e\n\u003cli\u003eHeader to attach FM transmitter\u003c\/li\u003e\n\u003cli\u003e3 USB-A connector for WIFIi adapters or other USB devices\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet Connector\u003c\/li\u003e\n\u003cli\u003eExpansion header pins providing 8 gpio outputs and access to I2C bus, 3.3v power, and ground\u003c\/li\u003e\n\u003cli\u003eTemperature sensor.\u003c\/li\u003e\n\u003cli\u003eReal Time Clock\u003c\/li\u003e\n\u003cli\u003e5v 4-Pin PWM Cooling Fan Connector\u003c\/li\u003e\n\u003cli\u003e8 GPIO pins exposed to the user to allow adding additional buttons, proximity sensors, etc… to invoke various effects and functionality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eYou will need:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePocketBeagle 2 – the K16-Max will NOT work with a PocketBeagle 1\u003c\/li\u003e\n\u003cli\u003eThe latest FPP images can always be found at\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/FalconChristmas\/fpp\/releases\/\"\u003ehttps:\/\/github.com\/FalconChristmas\/fpp\/releases\/\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003cli\u003ews281x compatible pixels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kulplights.com\/wp-content\/uploads\/2025\/08\/K16.pdf\"\u003ehttps:\/\/kulplights.com\/wp-content\/uploads\/2025\/08\/K16.pdf\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.thingiverse.com\/thing:7181496\"\u003ehttps:\/\/www.thingiverse.com\/thing:7181496\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilbert Engineering USA","offers":[{"title":"Default Title","offer_id":54013140762924,"sku":"sku-52630202777912","price":241.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2782\/0131\/files\/IMG_1565.jpg?v=1788456647"},{"product_id":"kulp-k32-pro-pb2i","title":"Kulp K32 PRO-PB2i","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e The PB2 Industrial will have FPP installed on the internal eMMC. \u003cstrong\u003eNo SD card is required.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe K32-Pro is a cape for the PocketBeagle 2 that is designed to drive ws281x LED pixels. It has 32 local ports that can each drive 800 pixels (with power injection) at 40FPS. It also has 8 RJ45 differential ports that can output an additional 32 strings via differential receivers. Finally, it has two RS485 outputs for DMX, PixelNet, Renard, LOR.\u003c\/p\u003e\n\u003cp\u003eThe K32-Pro has a Real Time Clock (RTC) to maintain time, a temperature sensor, input voltage sensors, an OLED display with navigation push buttons, three powered USB ports, onboard sound, socket for FM transmitter, and a Gigabit Ethernet port (wired via USB2 so roughly 300Mb\/s speed).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eThe cape provides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32 pixel connectors in banks for four.\n\u003cul\u003e\n\u003cli\u003eEach bank of four can use any voltage from 5V – 24V\u003c\/li\u003e\n\u003cli\u003eEach string can provide up to 5A of power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e8 RJ45 connections for 32 more strings via differential receivers\u003c\/li\u003e\n\u003cli\u003e2 RJ45 connections for DMX\/LOR\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 USB-A connectors for WIFIi adapters or other USB devices\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eOn-board pcm5102 DAC and headphone jack for sound\u003c\/li\u003e\n\u003cli\u003eHeader to attach FM transmitter\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet Connector\u003c\/li\u003e\n\u003cli\u003eExpansion header pins providing 8 gpio outputs and access to I2C bus, 3.3v power, and ground\u003c\/li\u003e\n\u003cli\u003eTemperature sensor.\u003c\/li\u003e\n\u003cli\u003eReal Time Clock\u003c\/li\u003e\n\u003cli\u003e5v 4-Pin PWM Cooling Fan Connector\u003c\/li\u003e\n\u003cli\u003e8 GPIO pins exposed to the user to allow adding additional buttons, proximity sensors, etc… to invoke various effects and functionality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eYou will need:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePocketBeagle 2 – the K32-Pro will NOT work with a PocketBeagle 1\u003c\/li\u003e\n\u003cli\u003eThe K32 requires at least FPP 9.0 to be fully functional. The latest FPP images can always be found at\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/FalconChristmas\/fpp\/releases\/\"\u003ehttps:\/\/github.com\/FalconChristmas\/fpp\/releases\/\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003cli\u003ews281x compatible pixels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kulplights.com\/wp-content\/uploads\/2025\/05\/K32-Max.pdf\"\u003ehttps:\/\/kulplights.com\/wp-content\/uploads\/2025\/05\/K32-Max.pdf\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.thingiverse.com\/thing:7065715\"\u003ehttps:\/\/www.thingiverse.com\/thing:7065715\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilbert Engineering USA","offers":[{"title":"Default Title","offer_id":54013140959532,"sku":"sku-52512001753400","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2782\/0131\/files\/44838d7d-65ab-4ca2-a266-96d3b3563932.jpg?v=1788456647"},{"product_id":"kulp-k8-pro-pb2i","title":"Kulp K8 PRO-PB2i","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE: \u003c\/strong\u003eThe PB2 Industrial will have FPP installed on the eMMC. \u003cstrong\u003eNo SD card is required.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe K8-Pro is a cape for the PocketBeagle 2 that is designed to drive ws281x LED pixels. It has 8 local ports that can each drive 800 pixels (with power injection) at 40FPS. It also has 4 RJ45 differential ports that can output an additional 16 strings via differential receivers. Finally, it has one RS485 output for DMX, PixelNet, Renard, LOR.\u003c\/p\u003e\n\u003cp\u003eThe K8-Pro has a Real Time Clock (RTC) to maintain time, a temperature sensor, input voltage sensors, an OLED display with navigation push buttons, three powered USB ports, onboard sound, socket for FM transmitter, and a Gigabit Ethernet port (wired via USB2 so roughly 300Mb\/s speed).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe cape provides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8 pixel connectors in banks for four.\n\u003cul\u003e\n\u003cli\u003eEach bank of four can use any voltage from 5V – 24V\u003c\/li\u003e\n\u003cli\u003eEach string is protected by a 5A mini-blade fuse\u003c\/li\u003e\n\u003cli\u003ePower to each bank is enabled\/disabled as needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 RJ45 connections for 16 more strings via differential receivers\u003c\/li\u003e\n\u003cli\u003e1 RJ45 connection for DMX\/LOR\u003c\/li\u003e\n\u003cli\u003eOn-board pcm5102 DAC and headphone jack for sound\u003c\/li\u003e\n\u003cli\u003eHeader to attach FM transmitter\u003c\/li\u003e\n\u003cli\u003e3 USB-A connector for WIFIi adapters or other USB devices\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet Connector\u003c\/li\u003e\n\u003cli\u003eExpansion header pins providing 8 gpio outputs and access to I2C bus, 3.3v power, and ground\u003c\/li\u003e\n\u003cli\u003eTemperature sensor.\u003c\/li\u003e\n\u003cli\u003eReal Time Clock\u003c\/li\u003e\n\u003cli\u003e5v 4-Pin PWM Cooling Fan Connector\u003c\/li\u003e\n\u003cli\u003e8 GPIO pins exposed to the user to allow adding additional buttons, proximity sensors, etc… to invoke various effects and functionality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eYou will need:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePocketBeagle 2 – the K8-Pro will NOT work with a PocketBeagle 1\u003c\/li\u003e\n\u003cli\u003eThe latest FPP images can always be found at\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/FalconChristmas\/fpp\/releases\/\"\u003ehttps:\/\/github.com\/FalconChristmas\/fpp\/releases\/\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower supply\u003c\/li\u003e\n\u003cli\u003ews281x compatible pixels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMounting Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kulplights.com\/wp-content\/uploads\/2025\/12\/K8-Max.pdf\"\u003ehttps:\/\/kulplights.com\/wp-content\/uploads\/2025\/12\/K8-Max.pdf\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gilbert Engineering USA","offers":[{"title":"Default Title","offer_id":54013140926764,"sku":"sku-52630016655672","price":176.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2782\/0131\/files\/IMG_1935-1872x2048.jpg?v=1788456648"}],"url":"https:\/\/mattosdesigns.com\/en-gb\/collections\/kulp-controllers.oembed","provider":"Mattos Designs LLC","version":"1.0","type":"link"}