ChromaMesh 1.5"

This is made from the same material as our megatree strips. Comes in 1", 1.5", 2", 3", 4" mesh, with excess removed so wind can blow through. there are mounting holes for zip ties or screws at 6" spacing around perimeter. Mesh can be rolled up with nodes mounted and stored. These measure 4'x8' sheets for the full sheet matrix. (pic is of 2" spacing)

• Available in Black and White
• Fits 12mm bullet pixels and Evo pixels
• 1" center creates two Matrixes:
  • 47x95 for total of 4,465 nodes
  • 46x94 for a total of 4,324 nodes
  • If you were to fill in holes for both matrixes this would turn into a 1/2" center Mesh for a total of 8,789 nodes.
• 1.5" center creates 32x64 matrix for a total of 2,048 nodes
• 2" center creates a 24x48 matrix for a total of 1152 nodes
• 3" center creates a 16x32 matrix for a total of 512 nodes
• 4" center creates a 12x24 matrix for a total of 288 nodes
• Works with all 12mm nodes including Bullet, Square and Flat
• 100% American Made from Material, Design, and Fabrication