Choose Without Pixels for the coro prop only, or select With EVO or With EVO Dome to include matching pixels. Pixel bundles are unassembled; pixels are not installed.
With EVO and With EVO Dome options include 12V WS2811 pixels with black wire, 4-inch spacing, and M-Connect ends. Full strands are supplied; spare pixels may be included.
Pixel counts below apply only to options with pixels. Without Pixels includes no pixel strands.
- Prop: 154 pixels required, 200 pixels supplied.
See the original prop listing for dimensions, mounting requirements and model information.
CoroBell Animated Swing — Pixel Bundle
What This Is For
An animated bell prop with three bell positions so a sequence can make the bell appear to swing. It uses a defined bullet-node layout rather than physically moving the bell. Choose Without Pixels for the prop only, or With EVO or With EVO Dome to add lights. Pixels require installation.
JR Recommends
Match the model to the three-position pattern and check the wiring order before installing the lights. Test each bell position separately so the swing effect runs in the correct direction. Plan controller capacity and power for the selected configuration.

