Maker Pipe Adjustable Angle Hinge Connector Complete

$7.69

Sold out

The Adjustable Angle Connector is one of the most versatile structural pipe fittings in the Maker Pipe building system. It is designed to natively fit 3/4" EMT Conduit which is readily available at your local hardware store. The 1/2" connector variant includes two adapter shims for building with 1/2" EMT Conduit. The Adjustable Angle Connector gives you the ability to achieve any angle up to 90 degrees in either direction. Use the provided hardware to secure two pipes at a desired angle or partially tighten the top bolt and nut to create a hinge.

Available Colors; Black or Silver

Available Sizes; 1/2" or 3/4"

*Hardware is included with each Adjustable Angle Hinge Connector

STEEL CONSTRUCTION
CORROSION RESISTANT E-COATING
PRE-APPLIED FRICTION BAND
POCKET FEATURE
INTERLOCKING PUZZLE PIECE

The Adjustable Angle Connector consists of four pieces. The two long pieces secure a terminating pipe and create the end clamp. The two smaller pieces have interlocking puzzle pieces that secure a through pipe and create the puzzle piece clamp. You can buy all four pieces together or buy the bottom/top half separately if you need one and not the other.

Maker Pipe Adjustable Angle Hinge Connector Complete

You may also like

Subscribe